Indukciós áramlásmérő

Transmitter type

Battery powered - 2 x D Cell 3,6 V *

Battery life

Lithium battery pack up to 10 years

Accuracy

0,2 % +/- 2 mm/s - insertion sensors 2% of rate +/- 2mm/s

Temperature

Ambient: -20 ... +60 C° (-4 ... +140 F)

Media 0 ... 70 C° (32 ... +158 F)

Storage -40 ... +70 C° (-22 ... +158 F)

Enclosure

Policarbonate case with aluminum bottom on compact vertical version.

IP 67 / 68. Remote wall mount braket in carbon steel zinch plated

Cable entries

4X PG9 Glands I/O - 2X PG20 Glands junction box in remote version

Custody transfer

Type approved OIML R49-1 2013 / EN 14154 MID EN-ISO 4064 - Certificate n. T10713

Conformity

EMC: EN 61000-6-3, EN 61000-6-2, EN 61326-1

Sensor type

Full bore up to DN 600 - Insertion meters

Flow velocity range

0,015 m/s up to 10 m/s

Sampling rate

Standard mode 1 / 5 Hz up to 1 / 60 Hz (default 1 / 15 Hz) max 3,125 Hz

Installation

Integral (compact) or remote with factory mounted sensor cable in 5 m (16,4 ft) up to 30 m (98,4 ft)

Digital filters

Damping - cutt-off (0,05 m/s default) - bypass - peak cut

Display and keys

LCD display - Index, menu, and symbols icons for dedicated information 4 Push buttons to access all functions

Totalizer informations can be displayed with 5 decimal digits

Displayed informations

Live flowrate

Total positive totalizer (T+) Total negative totalizer (T-) Partial positive totalizer (P+) Partial negative totalizer (P-) Time & date

Converter temperature

Process pressure and temperature (if available) Parameters corresponding code and value

Flow Units

m, m3, l, ML, ft3, GAL

Outputs

2 pulses passive outputs (MOS), individual galvanically isolated - clean contact

Maximum load +/- 35V DC, 100 mA short circuit protected

Communication

Integrated Euromag IrComm interface

Datalogging

100,000 lines of data with a frequency of log between 1 minute and 120 minutes (default 15 minutes)

Add on modules

GSM/GPRS Euromag Module Pressure (1) and temperature (2)

Energy metering ready

Totalizers

4 (2 positive and 2 negative)

Date and time

Yes

Data protection

Password available, automatic firmware check and recover during the update

Alarms and status

Status icon displayed and alarm logged in the datalogger

Self diagnostic

Alarms available:

•     excitation failure                                                     •      high voltage supply

•     empty pipe on the 4th electrode                            •      pulse overlapped

•     empty pipe on the measuring electrodes             •      wet electronic board

•     high temperature

External verification

Field verificator available for calibration verification and electronic status

Software for communication and programming

Commissioning (equal settings of meters) - Data print for documentation - Data export (CSV file) - Firmware update - Read instant flowrate - Read and write all non volatile parameters - Download internal datalogger - View instrument event logger