MC 406 jelfeldolgozó (MID) indukciós áramlásmérőhöz
Az MC 406 indukciós áramlásmérő jelfeldolgozó rendelkezik MID hitelesítéssel, a régebbi típusoknál pontosabb eszköz. Az áramlásmérő jelfeldolgozó műanyagházas kivitelben, akkumulátorral működik.
MC 406 indukciós áramlásmérő jelfeldolgozó előnyei:
- az MC604 két csatornás IMPULZUS kimenettel rendelkezik
- az akkuk élettartama alaphelyzetben 6 év, extra akkuval 10 év
- az indukciós áramlásmérő jelfeldolgozóban van egy 100 000 soros data logger, melynek aktiválása után az infra-porton keresztül kiolvashatók a mérési értékek (pl. az éjszakai minimumok!)
Ajánlatkérés
Transmitter type | Battery powered - 2 x D Cell 3,6 V * |
Battery life | Lithium battery pack up to 10 years |
Accuracy | 0,2 % +/- 2 mm/s - insertion sensors 2% of rate +/- 2mm/s |
Temperature | Ambient: -20 ... +60 C° (-4 ... +140 F) Media 0 ... 70 C° (32 ... +158 F) Storage -40 ... +70 C° (-22 ... +158 F) |
Enclosure | Policarbonate case with aluminum bottom on compact vertical version. IP 67 / 68. Remote wall mount braket in carbon steel zinch plated |
Cable entries | 4X PG9 Glands I/O - 2X PG20 Glands junction box in remote version |
Custody transfer | Type approved OIML R49-1 2013 / EN 14154 MID EN-ISO 4064 - Certificate n. T10713 |
Conformity | EMC: EN 61000-6-3, EN 61000-6-2, EN 61326-1 |
Sensor type | Full bore up to DN 600 - Insertion meters |
Flow velocity range | 0,015 m/s up to 10 m/s |
Sampling rate | Standard mode 1 / 5 Hz up to 1 / 60 Hz (default 1 / 15 Hz) max 3,125 Hz |
Installation | Integral (compact) or remote with factory mounted sensor cable in 5 m (16,4 ft) up to 30 m (98,4 ft) |
Digital filters | Damping - cutt-off (0,05 m/s default) - bypass - peak cut |
Display and keys | LCD display - Index, menu, and symbols icons for dedicated information 4 Push buttons to access all functions Totalizer informations can be displayed with 5 decimal digits |
Displayed informations | Live flowrate Total positive totalizer (T+) Total negative totalizer (T-) Partial positive totalizer (P+) Partial negative totalizer (P-) Time & date Converter temperature Process pressure and temperature (if available) Parameters corresponding code and value |
Flow Units | m, m3, l, ML, ft3, GAL |
Outputs | 2 pulses passive outputs (MOS), individual galvanically isolated - clean contact Maximum load +/- 35V DC, 100 mA short circuit protected |
Communication | Integrated Euromag IrComm interface |
Datalogging | 100,000 lines of data with a frequency of log between 1 minute and 120 minutes (default 15 minutes) |
Add on modules | GSM/GPRS Euromag Module Pressure (1) and temperature (2) Energy metering ready |
Totalizers | 4 (2 positive and 2 negative) |
Date and time | Yes |
Data protection | Password available, automatic firmware check and recover during the update |
Alarms and status | Status icon displayed and alarm logged in the datalogger |
Self diagnostic | Alarms available: • excitation failure • high voltage supply • empty pipe on the 4th electrode • pulse overlapped • empty pipe on the measuring electrodes • wet electronic board • high temperature |
External verification | Field verificator available for calibration verification and electronic status |
Software for communication and programming | Commissioning (equal settings of meters) - Data print for documentation - Data export (CSV file) - Firmware update - Read instant flowrate - Read and write all non volatile parameters - Download internal datalogger - View instrument event logger |
Alkalmazási terület:
- Ivóvíz törzshálózati mérések
- Szállítóvezetékek
- Szennyvízmérés- szennyvízkezelés- szennyvíz szálltás
- Öntözési felhasználás